The Notifier NBG-12LRA is a non-coded, dual-action agent release station with an integral abort switch. Specifically, it pairs with NOTIFIER fire alarm control panels that support releasing functions. In addition, it works with RP Series releasing systems for chemical-agent or water-based suppression. As a result, the NBG-12LRA delivers manual control over a release event without changing host-panel programming.
The dual-action handle requires a push-then-pull motion. Therefore, accidental discharge from a bump or brush is unlikely. However, the abort switch on the front of the station can interrupt a release timer. Furthermore, two front-panel LEDs report status: a green Normal LED for power-on and a red Released LED for active release.
Notifier NBG-12LRA specifications
- Normal operating voltage: 24 VDC nominal (SLC-powered)
- Maximum SLC standby current: 375 µA
- Maximum SLC alarm current: 5 mA
- Operating range: 32°F to 120°F (0°C to 49°C)
- Humidity: 10% to 93% RH non-condensing
- Housing: durable red polycarbonate with raised lettering
- Indicators: green Normal (power) LED + red Released LED
- Per Notifier DN-6840 (NBG-12LR / NBG-12LRA / NBG-12LRAA)
Typical use
The NBG-12LRA suits areas with chemical-agent suppression. For example, clean rooms, computer rooms, and electrical equipment rooms use this station for manual agent release. Also, the abort switch lets occupants halt the release timer during a false trigger.
For more information, contact the Life Safety Consultants team at (888) 557-0558, or email us at: sales@lifesafetycom.com
Additional information
| Weight | 1.4 lbs |
|---|---|
| Dimensions | 9 × 5.5 × 3.5 in |
| Condition | New |
| Manufacturers | Notifier |
| Part Type | Relay Module |
