The Notifier NH-200 is an intelligent, addressable thermal detector. It senses heat at a fixed temperature of 135°F (57°C). First, it plugs into a separate B300-6 base. As a result, installation and service stay simple.
This low-profile heat detector works with Notifier FireWarden Series fire alarm control panels. In addition, it connects to the two-wire signaling line circuit (SLC). Therefore, the panel monitors each detector by its own address.
Notifier NH-200 detection and addressing
The NH-200 communicates using the FlashScan protocol. Also, you set its address with rotary decimal switches. As a result, the panel reports the detector’s exact location during an event. Furthermore, the detector responds to panel polling and reports its device type.
The NH-200 provides fixed-temperature heat sensing only. However, rate-of-rise and high-temperature versions are separate models. Specifically, the NH-200R adds rate-of-rise, and the NH-200H activates at 190°F (88°C).
Verified details
- Type: addressable, low-profile fixed-temperature heat detector
- Set point: 135°F (57°C) fixed temperature
- Protocol: FlashScan (two-wire SLC)
- Addressing: rotary decimal switches
- Base: plugs into a separate 6″ B300-6 base (included)
- Compatibility: Notifier FireWarden Series addressable panels
Finally, the NH-200 brings reliable heat detection to an addressable panel. Therefore, it suits areas where smoke detectors are not practical.
For more information, contact the Life Safety Consultants team at (888) 557-0558, or email us at: sales@lifesafetycom.com
Additional information
| Weight | 0.55 lbs |
|---|---|
| Dimensions | 6.4 × 6.3 × 2.6 in |
| Condition | New |
| Manufacturers | Notifier |
| Part Type | Heat Detector |
