RSG RMS-1T Pull Station — SPST Terminal Connection
The RSG RMS-1T is a Single Pole Single Throw (SPST) manual pull station with terminal connection from the RSG/Aames Security RMS Series. This is the most common configuration — a single normally-open circuit that closes when the station is activated, sending an alarm signal to the fire alarm control panel.
Key Features
- Single Pole Single Throw (SPST) contact configuration
- Terminal connection for direct wire termination
- Non-toxic die-cast metal construction
- Manufactured entirely in the U.S.A.
- 10 amp snap action switch
- Powder coated and plated surfaces resist corrosion
- Low profile design with smooth edges
- Use with or without break glass rod (no special tools needed)
- Hex screw or key lock access
Available Options
Station options including gold contacts (GCS), key lock (KL), key operated (KO), key switch (KS), pre-signal (PS), break glass adapter (DAH), and lift and pull covers (LP, LPA, LP/NY) are available as add-on configurations ordered separately.
Compatible accessories include the RMS-BB indoor back box, RMS-DBB deep back box, RMS-WP-BB weatherproof back box, glass rods (RMS-GR), trim plates (RMS-LGTP, RMS-SMTP), and replacement keys (KEY-RSG).
Questions? Contact Life Safety Consultants at (888) 557-0558 or email sales@lifesafetycom.com
Browse our full selection of Pull Station Replacement Parts.
Compatibility & Standards
This RSG accessory is designed for use with the complete RSG RMS Series manual pull station line, including standard terminal-connection, pigtail-connection, and toggle-switch models. All RSG pull station accessories are UL component-recognized and intended for installation by licensed fire alarm contractors in accordance with NFPA 72, local authority having jurisdiction (AHJ) requirements, and the manufacturer’s installation documentation. For bulk orders or contractor pricing, contact Life Safety Consultants directly. Stocked for rapid fulfillment; ships in 5–10 business days from our distribution center.
Additional information
| Weight | 0.5 lbs |
|---|---|
| Dimensions | 4.75 × 3.25 × 1.1 in |
| Part Type | Die Cast Metal, Manual, Pull Station |
| Condition | New |
| RMS Station Options | GCS (Gold Contact), KL (Key Lock), KO (Key Operated), KS (Key Switch), PS (Pre-Signal), DAH (Break Glass Adapter), LP (Lift and Pull Cover), LPA (Lift and Pull + Agent Release), LP/NY (Lift and Pull + NY Stripe) |






