RSG RMS-1T-WP-PS Pull Station with Pre-Signal

The RSG RMS-1T-WP-PS is a SPST terminal-block-connection manual pull station with the Pre-Signal (PS) option. Furthermore, it suits commercial and institutional fire alarm initiating-device circuits.

First, the PS configuration supports two-stage alarm sequences. Then, an initial pull signals staff before general evacuation. As a result, trained personnel can verify the event before broadcasting.

In addition, pre-signal operation is common in hospitals, schools, and high-rise buildings. However, the panel must be programmed for two-stage operation. Therefore, confirm panel and AHJ compatibility before specifying.

RSG RMS-1T-WP-PS Option Detail

The PS option provides a pre-signal contact for staff-only notification. Furthermore, full evacuation occurs only after staff confirm the event or the timer expires.

RSG RMS-1T-WP-PS Key Specifications

• Switch: 10 A snap-action, SPST (single-pole single-throw)
• Connection: terminal-block connections
• Housing: die-cast painted enclosure, gasketed for outdoor use
• Color: red, with raised lettering
• Mounting: standard 1-gang electrical box
• Used with or without break-glass rod (RMS-GR) — replacement requires no special tools
• Meets UL, FM, CSFM, and BSA requirements (per RSG)
• Weatherproof (WP) sealed housing for outdoor, semi-protected, and washdown locations
• Configured option: Pre-Signal (PS)

Compatible Accessories

For surface mounting outdoors, use the RMS-WP-BB weatherproof back box. Alternatively, use the RMS-DBB deep back box where extra depth is needed. In addition, glass rods are available as RMS-GR for break-rod operation.

Order or Get Application Help

Life Safety Consultants has stocked RSG/Aames Security pull stations since 2002. To order the RSG RMS-1T-WP-PS or confirm option fit, call 1-888-557-0558. Alternatively, email sales@lifesafetycom.com.

For more information, contact the Life Safety Consultants team at (888) 557-0558, or email us at: sales@lifesafetycom.com