The Potter Electric Signal PFC-6006 PCB is the replacement circuit board for the Potter PFC-6006 sprinkler monitoring panel. First, the PCB ships preassembled and tested. Then, integrators swap it into an existing PFC-6006 cabinet. As a result, field service avoids replacing the entire panel for a board-level failure.
Potter Electric Signal PFC-6006 PCB application
The PFC-6006 PCB carries all the functional electronics for the host panel. Specifically, it includes the 6 programmable Initiating Device Circuits. In addition, it carries the 0.5 amp NAC and 0.5 amp aux power output. Furthermore, it includes the dual-line DACT and Ethernet IP communicator. Also, the 2×16 LCD interface mounts on the same board.
Furthermore, the PCB mounts on the quick-removal standoffs inside the PFC-6006 cabinet. Therefore, service techs can pull and replace the board without removing the cabinet from the wall.
Verified architecture (host PFC-6006)
- Six programmable initiating device circuits
- Input 1 selectable Class A or Class B (waterflow input)
- Inputs 2-6 selectable from a menu including 2-wire smoke detection
- 1.0 amp power supply
- 1 NAC rated at 0.5 amp regulated
- 0.5 amp auxiliary power (constant or resettable, programmable)
- Strobe synchronization for Potter/AMSECO, Gentex, System Sensor, Cooper/Wheelock
- 2 x 16 LCD display with system LEDs and keypad
- P-Link for remote annunciator connections (up to 4 RA-6075)
- Onboard dual-line digital alarm communicator
- Built-in Ethernet with listed IP communicator
- Battery capacity: charges and houses 18 AH batteries (12 VDC, two required)
- AC mains: 1.0 amp at 120 VAC 60 Hz
- Battery: 105 mA standby, 160 mA alarm
- Listings: UL 864, NFPA 70, NFPA 72, NYC Fire Dept. Certificate of Approval 6282
- Operating environment: 32°F to 120°F, 93% humidity non-condensing
- Stock number: 3992346 (PFC-6006 PCB)
Ordering note
The PFC-6006 PCB is the board-only replacement. Specifically, it does not include the cabinet, transformer, batteries, or DACT phone-line surge protectors. Therefore, integrators reuse those parts from the existing panel.
For more information, contact the Life Safety Consultants team at (888) 557-0558, or email us at: sales@lifesafetycom.com
Additional information
| Weight | 5 lbs |
|---|---|
| Dimensions | 17 × 13 × 5 in |
| Condition | New |
| Manufacturers | Potter |
| Part Type | Replacement Part |
