The RSG SP-LPCO lift and pull cover is a dual-action accessory for SP Series toggle pull stations. First, the user lifts the hinged cover. Then, the user activates the toggle switch underneath.
SP-LPCO Lift and Pull Cover — Two Steps to Activate
The SP-LPCO adds a second motion before the SP-1 or SP-2 can be activated. As a result, casual contact with the station will not trigger the alarm. Therefore, the SP-LPCO is well suited for schools, hospitals, and other high-traffic occupancies where accidental activation is a concern.
Key Features
- Dual-action design — lift cover, then toggle switch
- Direct fit for SP-1 and SP-2 toggle pull stations
- Reduces nuisance activations in busy corridors and public spaces
- Cover only — the SP station is ordered separately
Compatibility
The SP-LPCO is engineered for the SP Series only. However, RSG offers a corresponding RMS-LPCO for the RMS Series line — those are not interchangeable. Furthermore, the SP-LPCO is included as standard on factory-built SP-1-LP and SP-2-LP combination stations. In addition, the SP-LPCO can be retrofitted to an existing SP station already in service.
Ordering the SP-LPCO Lift and Pull Cover
Life Safety Consultants stocks the SP-LPCO alongside the rest of the SP accessory line. Also, it pairs well with the SP-BB back box for new surface-mount installations. Finally, in-stock orders placed before 3pm ET typically ship the same day.
For more information, contact the Life Safety Consultants team at (888) 557-0558, or email us at: sales@lifesafetycom.com
Browse our full selection of Pull Station Replacement Parts.
Additional information
| Weight | 0.1 lbs |
|---|---|
| Dimensions | 4.75 × 3.25 × 1.1 in |
| Part Type | Die Cast Metal, Manual, Pull Station |
| Condition | New |
