Ditek (DTK-120/240HW) 120/240 vac, parallel protector, 3w(+g) , ul1449 listed spd type 1

$89.64

SKU: DTK-120/240HW Brand:

120/240 VAC, Parallel Protector, 3W(+G), UL1449 Listed SPD Type 1

1 in stock

The Ditek DTK-120/240HW is a parallel-mounted hardwired surge protective device (SPD) for 120/240 VAC split-phase electrical services. It is UL 1449 Listed as a Type 1 SPD and rated for 50 kA per phase peak surge.

The DTK-120/240HW protects 120/240 VAC split-phase 3-wire-plus-ground branch circuits and dedicated 240 VAC loads. Therefore, it suits residential service entrances, light-commercial panels, and single-phase 240 VAC equipment circuits.

First, the SPD parallels with the branch circuit at the panel. As a result, surges divert to ground before reaching downstream loads. In addition, a diagnostic LED shows ground-system power and SPD function. Furthermore, the compact enclosure mounts close to the protected panel to minimize lead length.

Ditek DTK-120/240HW Verified Specifications

  • Service: 120/240 VAC, split-phase (single-phase with neutral), 3-wire + ground
  • SPD type: UL 1449 Listed Type 1 (also installable as Type 2)
  • Peak surge current: 50 kA per phase
  • Per-mode peak surge current: 13,000 A/phase, 6,500 A/mode
  • MCOV: 130 / 260 V
  • Response time: < 1 ns
  • Operating frequency: 0 Hz to 400 Hz
  • Dimensions: 2.93 in × 2.83 in × 1.68 in (74.4 × 71.9 × 42.7 mm)
  • Standards: complies with ANSI/IEEE C62.41 and C62.45 Category B
  • Diagnostic LED indicates ground system power and SPD function

Application Notes

First, install on the line side or load side of the main breaker per the AHJ. As a result, the device provides Type 1 service-entrance protection or Type 2 branch-panel protection respectively. In addition, keep the lead length between the breaker and the SPD as short and straight as possible — this matters more than peak rating for real-world performance. Also, verify the service is 120/240 VAC split-phase before installing.

Order or Get Application Help

Since 2002, Life Safety Consultants has stocked genuine Ditek SPDs. To order the Ditek DTK-120/240HW or confirm service-configuration suitability, call 1-888-557-0558. You can also email sales@lifesafetycom.com.

For more information, contact the Life Safety Consultants team at (888) 557-0558, or email us at: sales@lifesafetycom.com

Additional information

Weight 0.8 lbs
Dimensions 6 × 4.25 × 2.75 in
Condition

New

Manufacturers

Ditek

Part Type

Replacement Part