The Notifier XP10-M is a ten-input addressable monitor module for intelligent Notifier fire alarm panels. First, it interfaces between the panel and normally-open contact devices. For example, it monitors pull stations, security contacts, and waterflow switches.
How the Notifier XP10-M monitor module works
Each XP10-M supports ten Class B initiating circuits, or five Class A circuits. In addition, the first address is set from 01 to 150. Then the next nine addresses auto-assign sequentially.
Installers may also disable up to two unused addresses on the module. Furthermore, the panel can drive a green LED indicator to blink, latch on, or latch off.
XP10-M specifications
- Inputs: 10 Class B, or 5 Class A initiating device circuits
- Address range: 01 to 150 (first address); next 9 auto-assigned
- Unused address disable: up to 2 per module
- Wire gauge: 12 AWG (3.31 mm²) to 18 AWG (0.821 mm²)
- Max SLC wiring resistance: 40 or 50 ohms (panel-dependent)
- Max IDC wiring resistance: 1,500 ohms
- Max IDC voltage: 10.2 VDC
- Max IDC current: 240 µA
- Listing: UL Standard 864, 9th edition
As a result, the XP10-M consolidates ten conventional contact inputs into one addressable point group. Therefore, it reduces wiring and address count on large legacy retrofits.
For more information, contact the Life Safety Consultants team at (888) 557-0558, or email us at: sales@lifesafetycom.com
Additional information
| Weight | 0.8 lbs |
|---|---|
| Dimensions | 12.1 × 8.95 × 2.15 in |
| Condition | New |
| Manufacturers | Notifier |
| Part Type | Monitor Module |
