The Potter Electric Signal HUB-M is a single-button hold-up switch for security and surveillance applications. First, it provides DPDT contacts that activate surveillance cameras or hold-up alarms. As a result, bank tellers and retail staff have a discreet panic button at the counter. Furthermore, the HUB-M is UL and ULC listed for hold-up protection.
Potter Electric Signal HUB-M operating modes
The HUB-M ships configured for momentary operation. However, integrators may convert it to latching operation in the field. Specifically, the kit includes an alternate latching cap that replaces the momentary cap. Once installed, the latching mechanism aligns under the latching ramp in the cover.
To unlatch the device after activation, insert a pocket screwdriver or paperclip into the reset hole. Then, the unit unlatches when the cap is released. Therefore, the HUB-M supports both reset workflows without rewiring.
Verified specifications
- Listings: UL and ULC
- Contact configuration: DPDT, momentary or latching (field-selectable)
- Switch rating: 3 Amps at 28 VDC/AC; 0.05 Amp at 125 VDC resistive
- Enclosure: ABS plastic
- Dimensions: 2″ W x 2-5/16″ L x 1″ H
- Weight: 1.5 oz
- Temperature range: 32°F to 140°F at 85% maximum humidity
- Stock number: 2020130
Installation notes
Install the HUB-M in accordance with UL 681. First, place devices where the public cannot observe them. Then, position the button so staff can press it inconspicuously. In addition, at least one HUB-M must be installed in each vault that is open during business hours. For banks, also install units in offices commanding a view of the public space.
The HUB-M is not recommended for outdoor use or for installation in coolers and freezers.
For more information, contact the Life Safety Consultants team at (888) 557-0558, or email us at: sales@lifesafetycom.com
Additional information
| Weight | 0.6 lbs |
|---|---|
| Dimensions | 4 × 3 × 2 in |
| Condition | New |
| Manufacturers | Potter |
| Part Type | Replacement Part |
