The Altronix (CLIP4) kit is a set of two DIN-rail mounting clips for Altronix power supplies and sub-assemblies. Specifically, the clips secure Altronix boards to any standard 35 mm DIN rail.
First, attach the two clips to the back of your Altronix board. Then, snap the assembly onto a standard 35 mm DIN rail such as Altronix D10, D12, D19, or D24. As a result, the board mounts cleanly without screwing into a panel back-pan. In addition, the three-position design accommodates a wide range of Altronix board footprints. Therefore, the same clip kit works across multiple Altronix product families.
Altronix (CLIP4) — Verified Specifications
- Quantity: set of two (2) clips
- Position options: three positions per clip for varied board widths
- DIN rail compatibility: any standard 35 mm DIN rail
- Verified compatible rails: Altronix D10, D12, D19, D24
- Function: mechanical mounting accessory only
Application Note
The CLIP4 is a mechanical accessory. Therefore, it carries no electrical or fire-alarm listing on its own. However, the UL or NFPA listing of the Altronix board you mount with it is preserved when installed per the board’s instructions.
Order CLIP4
To order the Altronix CLIP4 mounting-clip pair, call 1-888-557-0558. You can also email sales@lifesafetycom.com.
For more information, contact the Life Safety Consultants team at (888) 557-0558, or email us at: sales@lifesafetycom.com
Additional information
| Weight | 0.5 lbs |
|---|---|
| Dimensions | 4 × 4 × 1 in |
| Condition | New |
| Manufacturers | Life Safety |
| Part Type | Replacement Part |
