The Notifier NMM-100-10 is a ten-input addressable monitor module for FireWarden Series control panels. Specifically, it interfaces normally open contact devices to one address block on the SLC. For example, pull stations, sprinkler flow switches, tamper switches, and security contacts all wire in cleanly. As a result, designers can monitor up to ten dry-contact circuits from a single module.
The first address sets via rotary decimal switches from 01 to 90. Then, the remaining nine addresses auto-assign sequentially to the next higher values. In addition, the module supports up to two disabled addresses for unused inputs. Therefore, partial-fill installs do not waste loop capacity, and the unused inputs remain available for future expansion.
Notifier NMM-100-10 wiring and configuration
- First, ten Class B initiating device circuits, or five Class A circuits
- Also, Class A operation requires removing the shunt on the module
- In addition, 1,500 ohms maximum IDC wiring resistance per circuit
- Maximum IDC voltage: 10.2 VDC
- Maximum IDC current: 240 µA
- Wire gauge range: 12 AWG to 18 AWG
- Furthermore, ten panel-controlled green LED indicators (blink, latch on, or latch off)
Notifier NMM-100-10 specifications
- Compatible panels: Notifier FireWarden Series FACPs (FlashScan SLC)
- SLC standby current: 3.5 mA (all 10 addresses enabled)
- SLC alarm current: 55 mA (all ten LEDs solid ON)
- Dimensions: 6.8" H × 5.8" W × 1.25" D (172.7 × 147.3 × 31.8 mm)
- Operating range: 32°F to 120°F (0°C to 49°C) UL
- Humidity: 10% to 85% RH non-condensing UL
- Per Notifier DN-6990:A (NMM-100-10 / NMM-100-10A Ten-Input Monitor Module)
For more information, contact the Life Safety Consultants team at (888) 557-0558, or email us at: sales@lifesafetycom.com
Additional information
| Weight | 0.85 lbs |
|---|---|
| Dimensions | 12.1 × 9 × 2.05 in |
| Condition | New |
| Manufacturers | Notifier |
| Part Type | Photoelectric Smoke Detector |
