The System Sensor SCWLED-BP10 is a contractor bulk pack of ten SCWLED ceiling-mount LED strobes, white with FIRE marking. Buying the 10-pack streamlines larger jobs. In addition, every unit is the same L-Series with LED indoor strobe used across the platform.
LED technology is the headline here. Compared with older xenon strobes, the LED strobe draws far less current across the full candela range. Therefore, more devices fit on each notification appliance circuit, and power supply requirements shrink.
System Sensor SCWLED-BP10 Key Features
- Bulk pack of 10 SCWLED ceiling LED strobes (replaces the xenon SCWL-BP10)
- Field-selectable ceiling candela settings: 15, 30, 75, 95, 115, 150, and 177 cd
- Low LED current draw: 18–115 mA at 24 VDC depending on candela
- Digital Voltage Meter (DVM) test points on the face for troubleshooting without removing the device
- Plug-in universal mounting plate with wiring-continuity shorting spring
- Electrically compatible with legacy SpectrAlert, SpectrAlert Advance, and L-Series devices
Specifications
- Operating voltage: 16–33 V (regulated 24 VDC nominal only)
- Strobe flash rate: 1 flash per second
- Operating temperature: 32°F to 120°F; humidity 10–93% non-condensing
- Dimensions per unit: 6.83″ diameter × 2.07″ deep
- Synchronization via System Sensor sync-protocol power supplies or the MDL3 sync module
- Listings: UL files S5512/S4011, FM (FM23FPUS0195), CSFM 7300-1653:0525
Need single units instead? Order the SCWLED. Alternatively, the SCRLED covers red-housing applications and the SBBCWL adds a white ceiling surface-mount back box.
For more information, contact the Life Safety Consultants team at (888) 557-0558, or email us at: sales@lifesafetycom.com
Additional information
| Weight | 9 lbs |
|---|---|
| Dimensions | 19.5 × 15.5 × 7.5 in |
| Condition | New |
| Manufacturers | System Sensor |
| Part Type | Smoke Detector |
