The System Sensor SWLED-BP10 is a bulk pack of ten white wall-mount LED strobes. First, each strobe delivers high-intensity visual fire alarm notification. Then, the LED platform lowers current draw versus older xenon strobes. As a result, the 10-pack streamlines larger jobs and stocking. Specifically, it suits multi-room commercial, institutional, and industrial projects.
System Sensor SWLED-BP10 features and candela settings
Each SWLED strobe uses field-selectable candela settings on a rotary switch. Specifically, wall settings are 15, 30, 75, 95, 110, 135, and 185 cd. Therefore, every unit adapts to its room and code requirement. In addition, the plug-in mounting plate speeds installation across many devices. Also, DVM test points allow voltage checks without removing each strobe. Furthermore, the strobes remain compatible with legacy SpectrAlert, SpectrAlert Advance, and L-Series appliances.
- Bulk pack of 10 white wall LED strobes, marked “FIRE”
- Field-selectable wall candela: 15, 30, 75, 95, 110, 135, 185 cd
- LED technology for low current draw
- Plug-in mounting plate with continuity shorting spring
- DVM diagnostic test points
- UL 1971 listed; indoor use
Specifications
- Pack quantity: 10 strobes
- Type: Wall strobe, white, 2-wire
- Nominal voltage: regulated 24 VDC
- Operating voltage range: 16 to 33 V
- Strobe current draw: 18 mA at 15 cd up to 120 mA at 185 cd
- Operating temperature: 32°F to 120°F (0°C to 49°C)
- Flash rate: 1 flash per second
These strobes work with addressable and conventional fire alarm systems on standard NACs. However, verify synchronization and power supply capacity for the device count. For outdoor needs, choose weatherproof L-Series strobes instead.
For more information, contact the Life Safety Consultants team at (888) 557-0558, or email us at: sales@lifesafetycom.com
Additional information
| Weight | 6.8 lbs |
|---|---|
| Dimensions | 16 × 12 × 6.5 in |
| Condition | New |
| Manufacturers | System Sensor |
| Part Type | Strobe |
