Notifier AFP-200RB Replacement CPU Board
The Notifier AFP-200RB is the factory replacement CPU board for the legacy Notifier AFP-200 fire alarm control panel. First, the AFP-200RB swaps directly into the AFP-200 enclosure. As a result, technicians can restore a failed AFP-200 to full operation without replacing the panel and its field wiring.
Specifically, the AFP-200RB is used when the original CPU experiences a failure, a display fault, or firmware corruption. Therefore, it serves as the critical spare for service contractors maintaining AFP-200 sites.
About the Notifier AFP-200 Panel
The AFP-200 is a legacy Notifier ONYX-series addressable panel. Furthermore, it remains installed in thousands of commercial, industrial, and institutional facilities. In addition, replacing the entire panel typically requires re-pulling field wiring and re-commissioning all loop devices.
As a result, board-level repair with the AFP-200RB is the faster and lower-cost path to restoring service.
Installation Notes
The AFP-200RB should be installed by a qualified fire alarm technician familiar with Notifier ONYX panels. Furthermore, panel programming and configuration must be reloaded after the swap. Therefore, plan for a programming session as part of the swap window.
Key Features
- Factory replacement CPU board for the Notifier AFP-200 panel
- Direct board-level swap — no enclosure or field wiring replacement
- Restores AFP-200 panel to full operational status
- Critical spare for service contractors maintaining legacy AFP-200 sites
Specifications
- Manufacturer: Notifier
- Part number: AFP-200RB
- Type: Replacement CPU board
- Fits: Notifier AFP-200 fire alarm control panel
- Note: Defective board return required upon replacement
Order the Notifier AFP-200RB
Life Safety Consultants stocks the Notifier AFP-200RB for service contractors maintaining AFP-200 installations. As a result, you can pull a critical spare CPU board on a single order. In addition, our technical team can assist with AFP-200 service guidance and legacy panel support. Note that defective-board return is required upon replacement.
For more information, contact the Life Safety Consultants team at (888) 557-0558, or email us at: sales@lifesafetycom.com
Additional information
| Weight | 3 lbs |
|---|---|
| Dimensions | 5 × 5 × 3 in |
| Condition | Reconditioned with one year warranty |
| Part Type | CPU Board, Smoke Detector |
| Manufacturers | Notifier |
| Compatible Panels | AFP-200 |
| Compatible Bases | N/A – panel board component |
| Cross Reference | AFP-200RB |
| Component | CPU Board, Platform: AFP-200 only, Application: Board-level replacement, Panel Generation: Legacy ONYX AFP-200 |
