The Ditek DTK-RM24NETS is a 24-channel, 1U rackmount surge protector for shielded Ethernet and PoE circuits. Specifically, it offers 20 kA of per-pair surge capacity in a single rack unit.
First, route the incoming shielded Ethernet runs to the device’s 24 shielded RJ45 IN ports. Then, patch the protected outputs to the rack switch or PoE midspan. As a result, the DTK-RM24NETS clamps surges on both data and power pairs before they reach network gear.
Ditek DTK-RM24NETS Maintenance
The modular design lets technicians swap a damaged channel from the front. In addition, the unit stays in the rack during module replacement. Therefore, post-strike service time drops dramatically compared to fixed-circuit SPDs.
Verified Specifications
- Configuration: 24 channels, 1U rack mount
- Connectors: shielded RJ45 in/out
- Data rate: up to 10GbE
- Cabling compatibility: Cat 5e, Cat 6, Cat 6A
- Per-pair surge capacity: 20 kA
- Suppression technology: SAD + GDT
- PoE compatibility: PoE Plus and HiPoE ready
- Field-replaceable modules accessible from front (no rack removal)
- STP cabling provides surge grounding path to remote devices
Typical Application
Use the DTK-RM24NETS where many outdoor cameras or remote PoE devices terminate at one rack. In addition, it suits campus-edge switch closets exposed to lightning risk. However, this is a network SPD and is not a fire-alarm device.
Order or Get Application Help
To order the Ditek DTK-RM24NETS or confirm shielded-cable compatibility, call 1-888-557-0558. Alternatively, email sales@lifesafetycom.com with your camera count.
For more information, contact the Life Safety Consultants team at (888) 557-0558, or email us at: sales@lifesafetycom.com
Additional information
| Weight | 4.3 lbs |
|---|---|
| Dimensions | 20 × 4.25 × 2.5 in |
| Condition | New |
| Manufacturers | Ditek |
| Part Type | Replacement Part |
