The Kidde GSA-MCT2 is a dual input plug-in module for the Signature addressable loop. First, it monitors one or two normally-open dry-contact initiating device circuits. Then, the loop controller reports each input as an addressable point.
In addition, the module plugs into a UIO (Universal Input/Output) mounting base. As a result, wiring lives on the motherboard, not the module itself.
How the Kidde GSA-MCT2 Works
The GSA-MCT2 reads analog data from its IDC inputs. Then, its on-board microprocessor decides whether the signal is an alarm, trouble, or normal. Finally, the result is reported to the Signature loop controller.
Furthermore, the module’s function is set by a “personality code”. Specifically, the installer downloads the code from the loop controller during commissioning. As a result, the same module can serve as alarm, supervisory, or monitor input depending on configuration.
Typical Applications
- HVAC duct detector relay tie-in
- Elevator recall input from a remote contact
- Fire door magnetic-hold drop signaling
- Auxiliary supervisory point monitoring
- Waterflow or tamper switch tie-in (dry contact)
Key Features
- Two normally-open dry-contact initiating-device circuits per module
- Configurable personality code for alarm, supervisory, or monitor function
- UIO plug-in form factor — wiring terminates to the motherboard
- Compatible with Kidde / Vigilant Signature loop controllers
- UL and ULC Listed
Order the Kidde GSA-MCT2
Life Safety Consultants stocks the GSA-MCT2 alongside other Signature-loop UIO modules. To confirm the right input module and personality code for your application, call 1-888-557-0558. Alternatively, email sales@lifesafetycom.com.
For more information, contact the Life Safety Consultants team at (888) 557-0558, or email us at: sales@lifesafetycom.com
Additional information
| Weight | 0.5 lbs |
|---|---|
| Dimensions | 5 × 5 × 2 in |
| Condition | New |
| Manufacturers | Kidde |
| Part Type | Input Module |
