The Gentex GEH24-W is a Commander Series horn-only notification appliance with a white faceplate. It is designed for wall-mount installation on 24 VDC notification appliance circuits. As a result, this unit provides audible signaling without a strobe element. Furthermore, the white faceplate suits installations where a strobe is provided by a separate appliance.
Gentex GEH24-W Specifications
The GEH24-W runs on 24 VDC nominal NAC power. In addition, the horn-only configuration draws less current than a comparable horn/strobe. Also, the unit is configured for indoor wall mounting. Furthermore, the horn signaling may be synchronized when used with a Gentex synchronization source.
Listings and Standards
This Commander Series horn carries the manufacturer-published listings below:
- UL 464 — Audible Signal Appliances
- Designed for indoor use
Installation Notes for Gentex GEH24-W
First, the horn-only configuration is for use where a separate strobe is installed nearby. Therefore, this device alone does not satisfy ADA visual-notification requirements. Then, the GEH24-W mounts to a standard electrical backbox. Also, ensure proper polarity on the NAC circuit during termination. However, the unit is not listed for outdoor or wet locations.
Order Gentex GEH24-W from Life Safety Consultants
Life Safety Consultants stocks Gentex Commander Series horns for commercial installers. To order, call 1-888-557-0558. Alternatively, email sales@lifesafetycom.com.
For more information, contact the Life Safety Consultants team at (888) 557-0558, or email us at: sales@lifesafetycom.com
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 4.5 × 3.25 × 5.75 in |
| Condition | New |
| Manufacturers | Life Safety |
| Part Type | Strobe |
