Gentex (GHLFR) Low frequency horn, temporal 3 sounder, temporal 4 capabilities, plain (no lettering) , red faceplate. 24 vdc

$60.45

SKU: GHLFR Brand:

276 in stock

The Gentex GHLFR is a 24 VDC low-frequency horn from the Gentex GHLF Series. It produces a 520 Hz square-wave audible signal in Temporal 3 pattern. As a result, it satisfies the NFPA 72 sleeping-area audibility requirement for new commercial installations. Furthermore, the GHLFR ships with a red faceplate and plain (no lettering) bezel.

Gentex GHLFR Specifications

The GHLFR operates at 24 VDC nominal. In addition, it accepts an input voltage range of 16–33 V on filtered DC or full-wave-rectified power. Also, the unit produces a peak sound output of 88.3 dBA in an anechoic chamber, per the manufacturer datasheet. Furthermore, it carries a jumper selection for either NORMAL or LOUD decibel output.

Per the Gentex datasheet, minimum SPL at 10 ft (reverberant room, UL 464) is 77.8 dBA NORMAL / 79.8 dBA LOUD in Temporal 3 520 Hz. Also, Temporal 4 520 Hz (when used with the GTSM module) is 81.5 dBA NORMAL / 83.4 dBA LOUD. Operating current at 24 VDC nominal is 72.1 mA NORMAL / 120.1 mA LOUD in Temporal 3, and 75.9 mA NORMAL / 116.0 mA LOUD in Temporal 4.

Listings and Standards

This Gentex GHLF Series horn carries the manufacturer-published listings below:

  • ANSI/UL 464 Listed for fire protective signaling systems
  • CAN/ULC S525 Listed
  • CSFM 7135-0569:0148
  • NFPA 72 and IBC/IFC/IRC compliant

Installation Notes for Gentex GHLFR

First, the 520 Hz low-frequency tone is intended for sleeping-area audibility per NFPA 72 Chapter 18. Therefore, the GHLFR is well-suited to hotels, dormitories, and other Group R occupancies. Then, the unit ships with the Gentex Super-Slide® mounting bracket. Also, the bracket allows prewiring and supervision testing without removing the signal head. Furthermore, input terminals accept 12–18 AWG wire. However, Temporal 4 pattern requires the Gentex GTSM Synchronization Control Module. In addition, the GHLFR is not listed for outdoor use, and operating temperature is 32°–120°F (0°–49°C). Unit dimensions are 6-1/8″ H × 5-1/2″ W × 1-5/8″ D.

Order Gentex GHLFR from Life Safety Consultants

Life Safety Consultants stocks Gentex GHLF low-frequency horns for commercial installers. To order, call 1-888-557-0558. Alternatively, email sales@lifesafetycom.com.

For more information, contact the Life Safety Consultants team at (888) 557-0558, or email us at: sales@lifesafetycom.com

Additional information

Weight 1.17 lbs
Dimensions 5.5 × 2.56 × 6.56 in
Condition

New

Manufacturers

Life Safety

Part Type

Horn / Strobe