The Kidde GSA-CC1 is a single-input signal module on the Signature addressable loop. First, it acts as a riser selector for one notification circuit. Then, the loop controller drives the circuit through this module.
In addition, the GSA-CC1 sources power from a separate signal riser. As a result, the module switches a 24 VDC notification circuit or a 25/70 V audio evacuation circuit. Specifically, the personality code at commissioning chooses the function.
How the Kidde GSA-CC1 Works
The GSA-CC1 plugs into a SIGA mounting plate or matching base. Then, field wiring connects the riser source, the outgoing circuit, and end-of-line supervision. Finally, the loop controller addresses the module like any other Signature point.
Furthermore, the personality code is downloaded from the panel during commissioning. As a result, the same module can serve as a Class A or Class B signal output. Also, supervisory monitoring continues whether the circuit is idle or active.
Typical Applications
- Notification appliance circuit (NAC) for horns or strobes
- Audio evacuation speaker circuit at 25 V or 70 V
- Class A or Class B signal riser break-out
- Synchronized signal output through a compatible sync source
Key Features
- Single signal-circuit output on the Signature loop
- Configurable for 24 VDC signal power or 25/70 V audio
- Personality code selects Class A or Class B operation
- UL 38, UL 864, ULC-S527, ULC-S528, and FM3010 listed
- Compatible with Kidde / Vigilant / Edwards Signature loop controllers
Order the Kidde GSA-CC1
Life Safety Consultants stocks the GSA-CC1 alongside other Signature signal and UIO modules. To confirm the right module and personality code for your project, call 1-888-557-0558. Alternatively, email sales@lifesafetycom.com.
For more information, contact the Life Safety Consultants team at (888) 557-0558, or email us at: sales@lifesafetycom.com
Additional information
| Weight | 0.5 lbs |
|---|---|
| Dimensions | 5 × 5 × 2 in |
| Condition | New |
| Manufacturers | Kidde |
| Part Type | Relay Module |
