The Notifier PSE-6E is a 6-amp remote power supply with battery charger for fire alarm systems. Specifically, the “E” suffix designates the 240 VAC export variant. Furthermore, the PSE-6E pairs with any 12 or 24 VDC Notifier FACP. Alternatively, it operates as a standalone power supply.
What the Notifier PSE-6E delivers
The PSE-6E provides 24 VDC NAC and auxiliary power to remote notification appliances. Then the host FACP commands NAC activation through a control input. As a result, the panel offloads NAC current to the PSE-6E. Therefore, heavy NAC cable does not run back to the main supply. In addition, the PSE-6E charges its own backup batteries for standby.
Power input and output
The PSE-6E primary input is 240 VAC, 50/60 Hz, 2.7 A maximum. Specifically, this is the export variant; the PSE-6 sibling uses 120 VAC. Furthermore, total continuous output is 6.0 A across all loads. Special application power per circuit reaches 3.0 A. Also, any one regulated 24 VDC AUX circuit reaches 1.0 A.
NAC configuration
The PSE-6E supports Class B or Class A NAC wiring. However, Class A requires the optional ZNAC-PS card. In addition, the supply handles multiple sync protocols for strobe synchronization.
Battery cabinet and charging
The PSE-6E cabinet holds two 7 AH or 18 AH batteries. Furthermore, an auxiliary battery cabinet supports charging up to 33 AH. As a result, the supply meets a wide range of standby battery sizing requirements.
AUX outputs
Auxiliary power outputs feed detectors, annunciators, door holders, and other 24 VDC peripherals. Also, AUX power is selectable as constant or resettable per circuit. Therefore, the PSE-6E integrates cleanly into mixed-load installations.
For more information, contact the Life Safety Consultants team at (888) 557-0558, or email us at: sales@lifesafetycom.com
Additional information
| Weight | 17 lbs |
|---|---|
| Dimensions | 24 × 17 × 5 in |
| Condition | New |
| Manufacturers | Notifier |
| Part Type | Power Supply |
