The Simplex 2080-9070 is a surface-mount maintenance switch for Simplex fire alarm systems. It is the version without a disconnect indicator lamp (the 2080-9060 is the lamp-equipped version).
First, the technician presses the momentary pushbutton on the stainless steel single-gang plate. Then the switch opens the connection to the output circuit. In addition, it places a 16.2 kΩ resistor across the input circuit. As a result, the host panel reports a supervisory condition while the field circuit is taken out of service for maintenance.
Simplex 2080-9070 Key Features
- Surface-mount maintenance disconnect switch for Simplex fire alarm systems
- Stainless steel single-gang plate with momentary pushbutton
- Protruding collar guards against accidental actuation; collar is removable if not needed
- 3-position contact block housing ships with one contact block installed
- Includes a red mounting box for surface installation
- No disconnect indicator lamp on this variant (see 2080-9060 for the lamp version)
- Disabled position opens the output circuit and inserts a 16.2 kΩ supervisory resistor on the input
When to Use the 2080-9070
Specifically, this maintenance switch is used to take a notification appliance circuit, IDC, or auxiliary circuit out of service for maintenance without dropping the rest of the panel into trouble. Therefore, it is common during testing, drill prep, and component swaps where a momentary disconnect with full supervisory reporting is required.
For more information, contact the Life Safety Consultants team at (888) 557-0558, or email us at: sales@lifesafetycom.com
Additional information
| Weight | 0.65 lbs |
|---|---|
| Dimensions | 6 × 5.75 × 6.5 in |
| Condition | New |
| Manufacturers | Simplex |
| Part Type | Battery |
