The Fireray 1150-000 is the commissioning and maintenance kit for Fireray reflective beam smoke detectors. Specifically, it gives the installer test filters that simulate alarm and fault conditions at the reflector. As a result, the tech can verify the detector’s alarm and fault responses without lighting a fire. In addition, the kit ships with a cleaning cloth for the lens and reflector surfaces.
What the Fireray 1150-000 kit is used for
Use the kit during initial commissioning of a beam detector. Then use it again at every periodic service interval. First, hold the alarm-simulation filter at the reflector and confirm the panel goes into alarm. Then test the fault filter and confirm a trouble signal. Finally, clean the lens and the reflector surface with the supplied cloth to remove dust.
Compatibility
The 1150-000 kit covers the Fireray reflective beam detector range, including the Fireray 2000, Fireray 3000, Fireray 5000, and Fireray One platforms. Therefore, one kit can support multi-model field service work. However, always follow the relevant detector’s installation manual for the exact commissioning sequence.
Specifications
- Use: commissioning and periodic maintenance of Fireray reflective beam smoke detectors
- Contents: alarm test filter, fault test filter, lens and reflector cleaning cloth
- Compatible detectors: Fireray reflective beam range (verify against the specific detector’s installation manual)
- No batteries or electrical interface — passive optical test tool
For pricing, lead time, or compatibility questions, contact the Life Safety Consultants team at (888) 557-0558, or email us at: sales@lifesafetycom.com
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 14 × 14 × 1 in |
| Condition | New |
| Manufacturers | Simplex |
| Part Type | Battery |
